Home / refinishing a tongue and groove porch floor

refinishing a tongue and groove porch floor

With just a $100 budget, CafeMom lil_red_53, with help from her mom, recently refinished the tongue and groove pine wood floor on the front porch of her 1870's farmhouse. And wow, wait until you the finished porch! Plus, lil_red_53 is here today to give us her step-by-step instructions for completing a front 

AsktheBuilder.com: Front porches in older homes often had wood flooring. This wood can rot if not treated properly. Replacing tongue and groove wood flooring on porches is easy.

The wood is tongue and groove, probably fir. . Thanks, my porch floor is anywhere from 4 to 6 feet higher than the soil below it and that soil never gets wet do you think moisture is still causing the paint to peel? 0 · Reply IT COST A LOT BUT PROBABLY NO MORE THAN TO KEEP STRIPPING & REPAINTING.

The first phase of a front-porch restoration is to complete construction of the porch floor, including support and decking. If you use tongue and groove porch decking, ensure that all sides are primed before you install (Image 1) in order to prevent moisture damage. This will provide a straight edge for finishing (Image 1).

Professional tips for refinishing a porch floor.

Ted arrived to find a porch with rotten tongue-and-groove decking, disintegrating steps, falling-off balusters, columns compressed into the floor, and a pops a chalk line, and makes a straight cut across the width of the porch; Ted and Mike then added a finishing touch by cleaning their cut up with a router.

Sanding the Porch. And they brought all of the accessories to go with the sander. This was about half the amount of floor pads we used when we refinished the floors in our upstairs. The wood in our house is more than 100 years old and not sealed with the products they made these days. It stays on there!

Replace Porch Flooring: The rotten wood porch flooring was removed and replaced with pressure treated, tongue-and-groove, 1” x 4” flooring. Repair Siding: In addition to caulking joints in the siding, construction adhesive was applied to cracked boards, and a scrap of lumber was screwed to each side of the crack to align 

That's a piece of one inch* thick rift sawn, tongue and groove, Douglas fir or yellow pine porch flooring/decking. From the looks of the growth rings, it was milled in the US in the 1940-1950s. You can still purchase newly manufactured boards that look identical to that one to this day. Stain it using tea staining 

The softness and vulnerability of pine can give it appeal on the floor, but these same qualities can be problematic when applying a stain. Pine tends to absorb stain unevenly, and the resulting blotchiness is seldom attractive. You can avoid this by proper preparation of the wood before you stain and by using the right type of 

Choosing the right wood finish for your old house may be the hardest part. Use this guide to make the decision a little clearer.

The porch flooring is IPE or Brazilian hardwood… or something I do not really understand. If you do, good .. The pleasure we took from finishing our patio, after 2 years of mouldy concrete, A joy, your deck looks good, and after sanding our internal floors I think getting someone to do it for you was a good move. Jim. Reply.

Before Article: wpc flooring for Landscape
Next Article: acrylic infused commercial engineered hardwood

Copyright © 2011-2018.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.