Home / how install deck railing post on concrete porch

how install deck railing post on concrete porch

We show you how to build wooden post and how to attach and anchor to hardware post photos of railing for outside steps Covering Concrete Stairs With Wood - General Discussion - . DIY: Building a Deck on Concrete - will need if we ever extend the porch around the house to make it all uniform wood decking.

Last post. Tue, 06/04/2013 - 16:55. #1. David. Install railing on concrete deck. My house was built in 1955 and has a concrete deck off the back. cut a 9" square in the concrete slab (assuming it's on dirt), remove the broken concrete, dig down at least 18", pour new concrete and insert a Simpson 4x4 anchor in the concrete.

You will need to use a post plate mounting system of steel for your aluminum porch railing. You will attach your first post onto the wall using your mounting brackets. One that is near the top and one that is above your baluster rail baseline will be needed. Your base plate needs to be set just underneath your post. Make sure 

This project explains how to build a deck rail from scratch using pressure treated lumber and mount the rail on a concrete patio using concrete wedge anchors. The 4×4 end posts are mounted on 1/2 inch threaded concrete anchors and tied into the main 8×8 deck supports as shown here. The deck rail 

Installing a custom porch vinyl railing on your porch, veranda or deck is a smart and easy way to beautify your outdoor living space. A porch railing to be mounted into concrete has longer support posts than a porch rail made for attaching to a wood floor base. Specify which you need when purchasing your supplies.

Measure on the concrete where each post will be placed. Have someone hold the railing on the porch, then mark where the posts will go. Mark each corner of each post to determine the center for the bolt-down post holders.

I use 2x stock for hanger boards, and whenever possible I attach the hanger boards to the tails of the deck posts to add strength to the railing and help support the hanger …and then I drill pilot holes with a hammer drill into the concrete for Tapcon screws, which secure the bottom board to the concrete.

Before Article: how much fence do i need for 110 sq ft
Next Article: most Fence around the garden boards

Copyright © 2011-2017.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.