Home / trough planters made decking boards

trough planters made decking boards

Dimensions:Total Height: 1.2mSmall Planter Width: 0.6m Large Planter Width: 0.9mNew Planters handmade at our local timber yard, made from treated decking boards.

PLR 15: www.bosch-do-it.com/gb/en/diy/tools/plr-15- 27754-199929.jsp PCM 7: www.bosch-do-it.com/gb/en/diy/tools/pcm-7- 31948-1998

Built-In Planter Ideas. Deck Railing PlantersBig PlantersWooden Garden PlantersTrough PlantersRectangular PlantersDecking IdeasOutdoor DeckingDeck PatioOutdoor Benches. Courtyard - built in planters in outdoor bench 

You can use either scaffolding boards or decking boards to build a bespoke planter or flower trough.

Planters are pressure treated and manufactured from decking boards and substantial framing, can be made to any size.

the one stop shop for all your garden planter needs.

Buy great products from our Gardens Category online at Wickes.co.uk. We supply trade quality DIY and home From paving and slow grown timber decking to sheds, we have what you need for your garden this winter. We have everything you need to install or Feather Edge Boards & Arris Rails · Fencing Accessories.

In the first image below you can see a planter we made previously. It had very thin base slats and one has broken. The planter in this Instrucable will be filled with a lot of compost and will be very heavy so the slats need to be a bit more heavy duty. We used offcuts of decking we had in the shed. They are approximately 


Improve the look of your garden or patio with our unique wooden planters and troughs made from the finest quality decking board at competitive prices. Hundreds of sizes available! Welcome to the Decking Planters store here you can browse and buy from our online catalogue of different types, sizes, large and Small 

We use the best quality polypropylene semi permeable lining membrane. - Allows nutrients and water to pass through hence aiding in water retention as though you have planted in the ground. - Allows normal growth but will not allow roots to establish between boards and cause damage to the planter.

As an example :- To build a trough or rectangular planter around 2ft x 10″ (600mm x 250mm):. Saw a piece of sheet material, i.e. 3/4″ (20mm) plywood to size for the planter base. If you choose decking board, again as an example for the walls of the planter, saw 4 x 2ft (600mm) lengths for the longest 

Before Article: how much does it cost to install railings
Next Article: vinyl roofing for a square foot house not installed

Copyright © 2011-2018.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.