Home / plywood deck over existing

plywood deck over existing

Detail the roof correctly, and the decking part of the job is easy. Decking. Over a. Roof. EPDM membrane. Tapered sleeper. 1⁄2-in. fiber roof underlayment. 3⁄4-in. plywood sheathing There are tons of reasons to build a deck over a roof, from . existing building paper after stripping the siding, installed the butyl membrane 

Schluter also makes a similar membrane— called Ditra—that can be used in exterior tile applications over wood substrates. For decks built After removing the old, temporary plywood, I attached the new T&G sheathing to the framing using 2-inch deck screws and construction adhesive. In applying the 

Outdoor carpeting doesn't require stretching, and most brands cut easily with a utility knife. Opt for glue-down carpeting or wrap and tack the edges of the carpet around the ends of the deck for quick removal later. With a carpet, you'll want to lay plywood subflooring panels on top of the existing decking boards to rid the floor 

EPDM; TPO; Smooth Surface BUR/Modified Capsheet; Tar & Gravel; Standing Seam Metal; Corrugated Metal; New Construction Plywood; Spray Polyurethane Foam (SPF); Walking Deck over New Construction Plywood; Existing Walking Deck; Tile; Re-coat (Existing Metacrylics® Roof); Penetration Detail Instructions 

If the cement board was installed over a wood deck we are back to movement issues, plywood might work but those little bug guys just love that stuff preasure treated or no thats why I am still thinking accent and not the entire floor,,less movement. Idea>>>> this would take perfect weather, install PT pine klin 

Depending on the size of your deck, you could save two or three days' work by installing new decking boards directly over the old ones. One important reason to avoid doing this is that the deck foundation may not be able to handle the extra weight. Another reason is that the new decking raises the floor 

roofing, or roll roofing applied over an existing, solid roof deck of minimum 15/32" plywood. Note: Inspect the existing roof deck prior to the installation of the roof panels. The existing roof deck's condition must be acceptable to receive the metal roofing panels before installing the metal roofing panel. Installation does not 

www.homebuildingandrepairs.com Click on this link for more information about roofing repairs, home building and remodeling. This video will provide you with a few ideas and methods I used in the past for installing new roof sheathing like plywood or oriented strand board over spaced one by six 

We are often asked, why do we need plywood over our old solid sheathing? The keyword here is “solid.” It used to be standard to use shiplap, 1″ boards, tongue & groove, or other boards for the roof deck. These 8 to 12-inch wide boards were nailed together tight. plywood_1 When the roof was first nailed on, of course all 

Ames products work for deck repair making an old deck appear as if you just bought a new one! Contact us today to learn Elastomeric waterproof rubber basecoat for concrete, plywood and hard-to-stick surfaces. Self-Adhesive, Contouring Seam Tape for reinforcement over seams and cracks and around vents. Easy to 

Remove Old Boards And Resheet With T&G Plywood. Rip up everything to the joists in order to resheet the entire deck. Frame the deck as usual. An Old Deck. Uninstall the old railings. galvanized nails. You will trowel leveling cement over this later leaving a completely smooth surface for the glue and vinyl to adhere to.

up vote 0 down vote. I had a 60's house that also had 3/8" plywood as roof decking it was okay except for a few places. I'm also a fan of tearing off, but unless the plywood is rotten (in the falling apart sense), I would probably just skin over it.

Before Article: composite decking used indoors
Next Article: application for laying plank boards

Copyright © 2011-2018.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.