Home / ground deck cost square foot

ground deck cost square foot

Find out what factors affect the cost of a deck, compare the price of various decking materials and railings and get average installation costs per square foot. cheapest rail is no rail at all. Your local codes will vary, but usually decks that are less than 30 inches off the ground will be not be required to have a rail for safety.

The cost to install a 200-square-foot concrete patio is about $740 to $840 on average, according to HomeWyse.com, an online reference for home projects composite, and you aren't worried about your deck suddenly catching on fire, it will still be at least several feet, and maybe a lot of feet, off the ground.

According to the Hanley Wood and their Remodeling Online website, the cost for a wooden deck addition averages at $10,634 or $33 per square foot. The stairs for a ground level deck would usually include only three steps, and the railings would need pressure-treated wood posts, railings , and balusters ;.

Deck type and size. The most important cost consideration is the size and type of deck you want. The bigger the square footage, the more you can expect to pay. The type of deck boards you use will also factor into your overall cost. Where you're putting your deck also matters. If it's low enough to the ground 

A PT wood deck can cost $8-$50 a square foot ($2560-$16000 for a 16'x20' deck), but averages about $25-$35 a square foot ($8000-$11200 for 16'x20') This Old House estimates that building a simple, ground-level 10'x16' deck of PT wood with no railings is of moderate to hard difficulty (it helps to have 

While building a deck almost always costs less per square foot than adding interior space, the cost of a deck project can be substantial when figure in materials and Decks situated more than a few feet off the ground require more structural support and a greater number of stairs, upping the cost. Fancy rail 

You could build a treated-lumber raised deck, say 10x16 feet, for about $1,500 in materials. Hiring someone to do the work for you makes your total cost in the range of $3,500. You can buy the materials for a 12-foot-square redwood deck off the second floor, with a flight of steps leading to the ground, for about $6,000 and 

Cost of labor calculated as a fee per square foot to build standard one level deck with minimum 140 sq. ft. of deck area on a flat surface up to 5' above ground level excluding building stairs. Multi-level custom designed or decks smaller than 140 sq. ft. will be priced at higher rates. Cost to build stairs will be added as a 

Before Article: labor cost for deck installation
Next Article: 4x4 composite deck posts

Copyright © 2011-2017.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.