Home / how to cut composite decking

how to cut composite decking

Features & Specs. FEATURES. Designed for melt-free cuts; Includes diamond arbor knock-out; Laser-cut plate for true, straight cuts; Patented body slot design for smooth cuts; Modified Triple Chip Grind (MTCG) teeth 

The Arcus® Circular Saw Blade (Wood) & Compass Guide cuts radii with accuracy and speed out of composite decking material. Also use to cut wood decking for c

You can cut composite decking just as you would ordinary lumber – with a circular saw. The sharp edges on the end cuts can be beveled with a belt sander. Cut each board square and have the joints positioned at the center of the joist. Use a jigsaw to cut out notches where a post or a downspout penetrates the decking.

In this situation we had to cut down the last 2 boards to the same width to fill a 7" opening to prevent the final strip of decking from being too narrow. Decking around an inside rail post. Notch your composite decking material around rail posts. Make sure to leave at least an 1/8" gap for thermal expansion. In this case we will 

3. If necessary, use a jigsaw to cut a hole in the plank for the downspout. 4. Set the plank onto the deck, and use a putty knife to slip it under any existing metal flashing. 5. Measure to ensure the first deck board is parallel with the outer edge of the deck. 6. Fasten the deck board with composite decking screws along the edge 

supply a 3.6m baluster that can be cut into 4 equal 900mm lengths – this increases the height of the handrail to the required 1100mm. If you need further help with the composite decking installation process, consult our Frequently Asked Questions page. Alternatively, click here to view our downloadable 

Before Article: waterproof laminate flooring for kitchens
Next Article: veranda yellow fence

Copyright © 2011-2017.Shanghai Seventrust Industry Co.,Ltd All Rights Reserved.